Conlog Meter - Determining the estimated time remaining on the meter at the current rate of electricity usage

Conlog Meter - Determining the estimated time remaining on the meter at the current rate of electricity usage

You can calculate how long you will have electricity based on the current rate of usage. This feature is useful to determine if there are sufficient units on the meter to last while you are away.

e.g. At the current rate of usage, you will have electricity for 4 days. You will therefore need to enter a token within the next 4 days to ensure your electricity is not disconnected. To extend this time, turn off appliances that use electricity e.g. geyser.

Enter #074# on the meter's keypad.

    • Related Articles

    • High Electricity Usage

      High electricity consumption is a combination of many things which the resident will need to take into consideration before a conclusion is reached. How electricity is used during summer is different from how it is used in winter. Winter is much ...

    • High Electricity Consumption

      On Average, a single individual can consume anything between 10 - 20 Kwh per day during warmer seasonal periods; an individual’s daily consumption during colder seasonal periods can increase by an average of 30 to 50 %, depending on unique ...

    • Conlog Meter - What is my meter number?

      To view your meter number, enter #100# on your Conlog meter keypad. The meter number will be displayed.

    • Conlog Meter - beeping / alarm

      The Conlog Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the backspace (arrow) button for 3 seconds.

    • How to check the current and previous 30-day consumption on a Conlog meter

      To request the current and previous 30 day consumption information from the meter, enter one of the below codes on the keypad. For Current consumption: #271# For Previous 24 hours and previous 30-days: #272#