Conlog Smart Split Meter - RFCON

Conlog Smart Split Meter - RFCON

The RFCON error means that the interface cannot communicate with the meter.

  1. The interface (keypad and meter) is out of range move closer to the meter installed outside; or

  2. Electricity has tripped outside

  3. The Complex's electricity is off.

The most common error is that the interface is out of range - the keypad needs to be within 50 meters of the Meter. Press #036#meter no. or #075# to reset/strengthen the signal.

If the Electricity has tripped as the Estate Manager / Security for assistance in accessing the electricity panel to tune the power back on.

If the whole complex's electricity is off, wait for the power to come back on before trying again.

    • Related Articles

    • Conlog Meter - What is my meter number?

      To view your meter number, enter #100# on your Conlog meter keypad. The meter number will be displayed.

    • Conlog Meter - beeping / alarm

      The Conlog Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the backspace (arrow) button for 3 seconds.

    • Conlog Split Meter - How do I link my keypad to my prepaid meter?

      The keypad is linked to the to the prepaid meter by the meter number. Enter #36# The screen will display SER Enter the meter number

    • Conlog Meter - meter switches off and on constantly

      The Conlog meter is overloading due to tripping conditions. The STss Team needs contact Conlog to request an override token to resolve the problem. Please give the Stss Call Centre Agent the details of the error and request an overide token.

    • Conlog Meter - Flashing Light Bulb

      Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced or repaired. To reset the meter a Tamper Token must be entered. Please ask the STss Call ...