Identifying the Icons on your wUIU Smart Conlog Meter

1. Indicates rate of consumption
   
2. Tick icon = Accept  |  Cross icon = Reject
   
3. Meter in Information Mode
   
4. Info / Error Code
   
5. Error Mode / Technical Problem
   
6. Electricity Connected
   
7. System Busy
   
8. Low Credit 
   
9. Number of Remaining KW

• Related Articles

• Conlog Meter - What is my meter number?

  To view your meter number, enter #100# on your Conlog meter keypad. The meter number will be displayed.

• Conlog Meter - beeping / alarm

  The Conlog Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the backspace (arrow) button for 3 seconds.

• Conlog Smart Split Meter - RFCON

  The RFCON error means that the interface cannot communicate with the meter. The interface (keypad and meter) is out of range move closer to the meter installed outside; or Electricity has tripped outside The Complex's electricity is off. The most ...

• Conlog Meter - meter switches off and on constantly

  The Conlog meter is overloading due to tripping conditions. The STss Team needs contact Conlog to request an override token to resolve the problem. Please give the Stss Call Centre Agent the details of the error and request an overide token.

• Conlog Meter - Flashing Light Bulb

  Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced or repaired. To reset the meter a Tamper Token must be entered. Please ask the STss Call ...