Landis & Gyr - Four question marks ???? on the interface keypad

Landis & Gyr - Four question marks ???? on the interface keypad

When you see four question marks ???? on the interface keypad, the interface is looking for a meter number. Insert the meter number to link the keypad to the meter.

The STss Call Centre Agent can assist you with your meter number.

    • Related Articles

    • Landis & Gyr Meters - beeping / alarm

      The Landis & Gyr Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the 0 (zero) button for 3 seconds.

    • Landis & Gyr Meters - What is my meter number?

      To view your meter number, enter i000 on your Landis & Gyr meter keypad. The meter number will be displayed.

    • Landis & Gyr - My meter keypad is off and I need to insert the token

      If the keypad screen is off you can activate it up by pressing the "i" button. The keypad will not activate if the battery is flat. If you have electricity, plug the keypad in and the keypad will activate. If you do not have electricity, replace the ...

    • Landis & Gyr Meters: Error code 30

      Error 30 indicates that the keypad and the meter are not communicating correctly. This is usually due to interference from appliances or the keypad being too far from the meter. The cable that supplies the property with power (alternating current) is ...

    • Landis & Gyr - flashing Sad face with an open line

      Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced or repaired. To reset the meter a Tamper Token must be entered. Please ask the STss Call ...