Landis & Gyr Meters - beeping / alarm

Landis & Gyr Meters - beeping / alarm

The Landis & Gyr Meters have an audible alarm (beeping) to warn you of low credit.

To turn off this alarm using the meter keypad, press and hold the 0 (zero) button for 3 seconds.

    • Related Articles

    • Landis & Gyr Meters - What is my meter number?

      To view your meter number, enter i000 on your Landis & Gyr meter keypad. The meter number will be displayed.

    • Landis & Gyr Meters: Error code 30

      Error 30 indicates that the keypad and the meter are not communicating correctly. This is usually due to interference from appliances or the keypad being too far from the meter. The cable that supplies the property with power (alternating current) is ...

    • Conlog Meter - beeping / alarm

      The Conlog Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the backspace (arrow) button for 3 seconds.

    • Landis & Gyr Meters - a happy and sad face are flashing alternatively for 5 seconds after entering a token

      When the meter flashes a happy and sad face alternatly for 5 seconds after entering a token, this indicates that the token has expired or the tokens were not loaded in the correct order. Remember to load the oldest token first. If you gnerate a token ...

    • Landis & Gyr Meters - Sad Face & Line

      The Sad face and line displayed on your meter is indicating that the meter is in tamper mode. Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced ...