How to check the current and previous 30-day consumption on a Landis & Gyr meter

How to check the current and previous 30-day consumption on a Landis & Gyr meter

​To request the current and previous 30 day consumption information from the meter, enter one of the below codes on the keypad.

For Current consumption: i 008

For Previous 30-days: i 009

    • Related Articles

    • How to check the current and previous 30-day consumption on a Conlog meter

      To request the current and previous 30 day consumption information from the meter, enter one of the below codes on the keypad. For Current consumption: #271# For Previous 24 hours and previous 30-days: #272#

    • Landis & Gyr Meters - What is my meter number?

      To view your meter number, enter i000 on your Landis & Gyr meter keypad. The meter number will be displayed.

    • Landis & Gyr Meters - beeping / alarm

      The Landis & Gyr Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the 0 (zero) button for 3 seconds.

    • Landis & Gyr Meters: Error code 30

      Error 30 indicates that the keypad and the meter are not communicating correctly. This is usually due to interference from appliances or the keypad being too far from the meter. The cable that supplies the property with power (alternating current) is ...

    • Landis & Gyr - flashing Sad face with an open line

      Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced or repaired. To reset the meter a Tamper Token must be entered. Please ask the STss Call ...