Please refer to the PDF document for information on your Z-Link Prepaid Water Meter Keypad. The guide includes icons on the LCD Display Credit Status Indicators CIU and Meter Pairing Communication Messages Loading Tokens on the Meter (Charging the ...
Indicates rate of consumption Token required Tick icon = Accept | Cross icon = Reject Electricity connected Activity in progress, please wait Tamper mode is on Number of remaining KW
Indicates rate of consumption Tick icon = Accept | Cross icon = Reject Meter in Information Mode Info / Error Code Error Mode / Technical Problem Electricity Connected System Busy Low Credit Number of Remaining KW
On the keypad of your meter, key in the 20 digit token number. As you enter each number, it will reflect on the display allowing you to check that you are entering each number correctly. If you enter an incorrect number, use the backspace key to ...
The RFCON error means that the interface cannot communicate with the meter. The interface (keypad and meter) is out of range move closer to the meter installed outside; or Electricity has tripped outside The Complex's electricity is off. The most ...
You can calculate how long you will have electricity based on the current rate of usage. This feature is useful to determine if there are sufficient units on the meter to last while you are away. e.g. At the current rate of usage, you will have ...
Error 000000 indicates that the token has expired or the tokens were not loaded in the correct order. Remember to load the oldest token first. If you gnerate a token on Monday and another token on Wednesday, ensure you enter the token generated on ...
The Conlog Meters have an audible alarm (beeping) to warn you of low credit. To turn off this alarm using the meter keypad, press and hold the backspace (arrow) button for 3 seconds.
Tamper mode is activated when the meter has been disconnected from power - this can be due to load shedding or if the meter was disconnected to be replaced or repaired. To reset the meter a Tamper Token must be entered. Please ask the STss Call ...
To request the current and previous 30 day consumption information from the meter, enter one of the below codes on the keypad. For Current consumption: #271# For Previous 24 hours and previous 30-days: #272#
The screen goes off completely if there is no electricity supply to the meter. Check if the complex has power - ask the Security Team If the complex has power the power to your block or your unit may have tripped Check if your block has power - ask ...
The Conlog meter is overloading due to tripping conditions. The STss Team needs contact Conlog to request an override token to resolve the problem. Please give the Stss Call Centre Agent the details of the error and request an overide token.